We sent an email to [email protected] with personal account authorization details. If you can’t find it, please check Spam folder.
No purchased eSIM were found on the typed email.
To access personal account type the email that you used for eSIM purchase. If you don't have an eSIM yet, you can go to the purchase section.
Installation guide
Apple
Apple
Android
Android
QR-code
QR-code
QR-code
QR-code
Manual
Manual
Before you start:
Open the QR code on the screen of another device, print it out or save it to the Photos app (requires iOS 17 or later). If none of the above is possible, use manual installation.
Connect to Wi-Fi: A stable internet connection is required during the setup process.
Turn off VPN.
Next
Step 1 of 4
Open Settings and go to the “Cellular / Mobile Data” section.
Press “Add eSIM”.
Back
Next
Step 2 of 4
Select the “Use QR code” option.
Scan the QR code from the screen of another device, printed paper or press “Open Photos” and select the saved QR code (requires iOS 17 or later).
Wait until the installation is complete.
eSIM activation can take up to 10 minutes. Please do not scan the QR code again during the installation process.
Back
Next
Step 3 of 4
Open the installed eSIM in the “Cellular / Mobile Data” section in Settings.
Most likely, the eSIM will be the last in the list.
Important! Enable Data Roaming, otherwise your eSIM will not work.
Back
Next
Step 4 of 4
Open the installed eSIM in the “Cellular / Mobile Data” section in Settings.
Press “Mobile Plan Label”, then select “Custom Label” and rename the eSIM to UNISIM.
Back
Next
Done!
Your eSIM has been successfully installed.
If you are not using UNISIM, do not delete it from your device. We recommend temporarily disabling it.
Useful information:
How to start using UNISIM for mobile data?
How to check remaining balance?
How to select network manually?
Back
How to start using UNISIM for mobile data?
Click “Mobile Data” in the “Cellular / Mobile Data” section in Settings and select UNISIM.
Do not enable “Allow Mobile Data Switching” to avoid excessive roaming charges.
Back
How to check remaining balance?
Access your personal account by clicking the linklink or the personal account icon in the upper right part of our website.
Authorization lasts for 4 weeks. You can save time on re-authorization by logging in from your main browser.
Click the green arrow on the eSIM card to update the balance.
Back
How to select network manually?
Check data rates for the country of interest on our website
In the “Cellular / Mobile Data menu” section in Settings select UNISIM.
Press “Network Selection” and turn off “Automatic”.
Select a network (available networks will appear in a few seconds).
Back
Before you start:
Connect to Wi-Fi: A stable internet connection is required during the setup process.
Turn off VPN.
Next
Step 1 of 4
Open Settings and go to the “Cellular / Mobile Data” section.
Press “Add eSIM”.
Back
Next
Step 2 of 4
Select the “Use QR Code” option.
Press “Enter Details Manually”.
Copy the SM-DP+ and Activation code from the email with eSIM installation details and paste them to the respective fields.
eSIM activation can take up to 10 minutes. Please do not scan the QR code again during the installation process.
Back
Next
Step 3 of 4
Open the installed eSIM in the “Cellular / Mobile Data” section in Settings.
Most likely, the eSIM will be the last in the list.
Important! Enable Data Roaming, otherwise your eSIM will not work.
Back
Next
Step 4 of 4
Open the installed eSIM in the “Cellular / Mobile Data” section in Settings.
Press “Mobile Plan Label”, then select “Custom Label” and rename the eSIM to UNISIM.
Back
Next
Done!
Your eSIM has been successfully installed.
If you are not using UNISIM, do not delete it from your device. We recommend temporarily disabling it.
Useful information:
How to start using UNISIM for mobile data?
How to check remaining balance?
How to select network manually?
Back
How to start using UNISIM for mobile data?
Click “Mobile Data” in the “Cellular / Mobile Data” section in Settings and select UNISIM.
Do not enable “Allow Mobile Data Switching” to avoid excessive roaming charges.
Back
How to check remaining balance?
Access your personal account by clicking the linklink or the personal account icon in the upper right part of our website.
Access your personal account by clicking the linklink or the personal account icon in the upper right part of our website.
Click the green arrow on the eSIM card to update the balance.
Back
How to select network manually?
Check data rates for the country of interest on our website.
In the “Cellular / Mobile Data menu” section in Settings select UNISIM.
Press “Network Selection” and turn off “Automatic”.
Select a network (available networks will appear in a few seconds).
Back
Before you start:
Open the QR code on the screen of another device or print it out. If none of the above is possible, use manual installation.
Connect to Wi-Fi: A stable internet connection is required during the setup process.
Turn off VPN.
Next
Step 1 of 4
Open Settings and go to the “Network and Internet” section.
Press on “Add” button in SIMs section.
Нажмите «Добавление eSIM».
Back
Next
Step 2 of 4
Press “Download a sim instead?” and press “Next”.
Scan the QR code from the screen of another device or printed paper.
Press “Download” and wait until the installation is complete.
eSIM activation can take up to 10 minutes. Please do not scan the QR code again during the installation process.
Back
Next
Step 3 of 4
Open the installed eSIM in the “SIMs” section in Settings and turn it on.
Откройте подраздел настроек «Мобильные сети».
Important! Enable Roaming, otherwise your eSIM will not work.
Back
Next
Step 4 of 4
Open the installed eSIM in the SIMs menu.
Press the Edit symbol (pencil) and rename the eSIM to UNISIM.
Back
Next
Done!
Your eSIM has been successfully installed.
If you are not using UNISIM, do not delete it from your device. We recommend temporarily disabling it.
Useful information:
How to start using UNISIM for mobile data?
How to check remaining balance?
How to select network manually?
Back
How to start using UNISIM for mobile data?
Open UNISIM in the “SIMs” section in Settings.
Turn on Mobile Data.
Back
How to check remaining balance?
Access your personal account by clicking the linklink or the personal account icon in the upper right part of our website.
Access your personal account by clicking the linklink or the personal account icon in the upper right part of our website.
Click the green arrow on the eSIM card to update the balance.
Back
How to select network manually?
Check data rates for the country of interest on our website.
Open UNISIM in the “SIMs” section in Settings.
Turn off “Automatically select network”.
Select a network (available networks will appear in a few seconds).
Back
Before you start:
Connect to Wi-Fi: A stable internet connection is required during the setup process.
Turn off VPN.
Next
Step 1 of 4
Open Settings and go to the “Network and Internet” section.
Press on Add button in SIMs section.
Нажмите «Добавление eSIM».
Back
Next
Step 2 of 4
Press “Download a sim instead?” and press “Next”.
Press “Need help?” and select “Enter it manually”.
Copy the Connection-String from the email with eSIM installation details and paste it to the respective field.
Press “Continue” and wait until the installation is complete.
eSIM activation can take up to 10 minutes. Please do not scan the QR code again during the installation process.
Back
Next
Step 3 of 4
Open the installed eSIM in the “SIMs” section in Settings and turn it on.
Откройте подраздел настроек «Мобильные сети».
Important! Enable Roaming, otherwise your eSIM will not work.
Back
Next
Step 4 of 4
Open the installed eSIM in the SIMs menu.
Press the Edit symbol (pencil) and rename the eSIM to UNISIM.
Back
Next
Done!
Your eSIM has been successfully installed.
If you are not using UNISIM, do not delete it from your device. We recommend temporarily disabling it.
Useful information:
How to start using UNISIM for mobile data?
How to check remaining balance?
How to select network manually?
Back
How to start using UNISIM for mobile data?
Open UNISIM in the “SIMs” section in Settings.
Turn on Mobile Data.
Back
How to check remaining balance?
Access your personal account by clicking the linklink or the personal account icon in the upper right part of our website.
Access your personal account by clicking the linklink or the personal account icon in the upper right part of our website.
Click the green arrow on the eSIM card to update the balance.
Back
How to select network manually?
Check data rates for the country of interest on our website.
Open UNISIM in the “SIMs” section in Settings.
Turn off “Automatically select network”.
Select a network (available networks will appear in a few seconds).
